V2G UPDATE
Industry News & Analysis
Forum Recap

10 Key Takeaways from the Fall 2026 V2G Forum in Detroit

From lower-cost bidirectional charging to real-world grid integration, the V2G industry is making progress. Here's what we learned about where the technology stands—and what needs to happen next.

By Smart Grid ObserverNovember 16, 2026
Inside the AC demonstration · Control chain
01 · DispatchUtility / PNNL control requestA grid-service request enters the tested control chain.
02 · AggregationAmpVerve aggregation and controlRelays the requested control to charging equipment.
03 · Physical responseEmporia charger + EV test equipmentA Keysight-emulated EV / onboard inverter produces a measured response.

AC control chain shown; the separate DC test used a Heliox charger and either an actual electric school bus or an EV/battery emulator. Responses were measured using an emulated grid, not a public electricity network.

The vehicle-to-grid industry has spent years proving that electric vehicles can send electricity back to the grid. Now comes the harder part: making V2G work reliably, affordably, and at scale.

That was the central theme at the 8th V2G Business, Policy & Technology Forum, held October 27–29, 2026, at the American Center for Mobility in the Detroit area. The event brought together automakers, utilities, technology providers, national laboratories, regulators, and other industry stakeholders to examine what's working, what's not, and what needs to change.

There was plenty of encouraging news. New standards are opening the door to lower-cost equipment. Utilities are finding ways around longstanding interconnection hurdles. Research is showing that EV batteries can deliver valuable grid services.

And in one of the Forum's highlights, an industry team demonstrated how a utility, aggregator, charger, and EV or EV emulator can operate together to deliver a measurable power response in a controlled test environment.

But the presentations also made clear that promising technology doesn't automatically translate into a viable business.

Here are ten key takeaways from Detroit.

1. The End-to-End V2G Testbed showed the value of system-level interoperability testing.

One of the Forum's biggest achievements was a collaborative End-to-End V2G Testbed featuring both AC and DC bidirectional charging configurations.

The objective was straightforward but technically demanding: demonstrate that a utility can request energy from an EV and have that request travel through the necessary systems, ultimately producing the intended power response at an emulated grid interface.

As described in a post-Forum technical account by Keysight Technologies, the testbed used a distributed energy resource management system (DERMS) provided by DTE Energy and Pacific Northwest National Laboratory. A grid-service request traveled through aggregation software and a bidirectional charger to a vehicle or EV emulator.

In the AC test chain, the utility/PNNL control request passed through AmpVerve's aggregation and control layer to the charger and EV test equipment. The Emporia Energy charger communicated with a Keysight-emulated EV and onboard inverter using ISO 15118-20 Amendment 1. In the DC configuration, a Heliox charger operated with either an actual bidirectional electric school bus supplied by Ann Arbor Public Schools or a Keysight EV and battery emulator.

The two setups brought together technology from DTE Energy, PNNL, Keysight, Emporia, Heliox/Siemens, AmpVerve, Voltra, and other collaborators.

The result was more than a successful exchange of digital commands. The tested systems produced a measurable physical power response into an emulated grid, rather than operating on a public electricity network.

Why does that matter? Because V2G involves much more than getting a vehicle to communicate with a charger. Each participant in the chain may use different hardware, software, and communications protocols. Even standards-conformant equipment can encounter problems when connected to other systems. The result provides evidence for the particular AC and DC configurations tested; it does not establish compatibility across all vehicle–charger combinations or readiness for commercial fleet deployment.

Keysight's account credits months of collaboration and on-site integration work for bringing the demonstration together.

The next challenge is to turn that success into a repeatable testing process that can accommodate more manufacturers, equipment combinations, and utility systems—without requiring months of custom engineering each time. That process must also test what happens when communications are interrupted or a vehicle departs, not only when a dispatch succeeds.

2. Lower-cost AC V2G could be a game-changer.

The potential for substantially cheaper bidirectional charging was one of the Forum's most encouraging developments.

University of Delaware professor Willett Kempton, a pioneer in vehicle-to-grid research, outlined how using an EV's onboard inverter for bidirectional power flow can eliminate the need for more expensive external power-conversion equipment.

Kempton estimated that, when an EV uses its onboard inverter for AC power conversion, adding bidirectional capability to an onboard charger could add roughly $200 compared with a conventional unidirectional design. This was an incremental equipment-cost estimate, not an installed-system price. He also cited Ford's reported reduction of at least 60% in hardware-bundle costs compared with Ford's previous-generation approach, rather than a market-wide cost comparison.

Those numbers matter. High equipment and installation costs have long been among the biggest obstacles to residential V2G adoption.

Ford's Rohan Desai emphasized that consumers ultimately want three things: affordable equipment, simple operation, and the freedom to use different manufacturers' products.

Lower-cost AC technology could also make EVs attractive for home backup power, vehicle-to-load applications, and other services—even where utilities have yet to establish V2G compensation programs.

The opportunity is significant. But the industry still needs to make these lower-cost systems easy to certify, install, and connect.

3. Standards are falling into place. Interoperability is another matter.

The standards landscape changed considerably in 2026.

UL 1741 Supplement SC, published May 21, 2026, established a certification pathway for AC bidirectional EV supply equipment used with SAE J3072 onboard inverters. ISO 15118-20 Amendment 1 was published July 13, 2026, adding AC distributed energy resource (DER) service communications, among other changes. SAE J3072, most recently revised in June 2024, defines requirements for grid-support onboard inverters and their authorization through EV supply equipment. These are complementary standards and certification provisions; publication of a standard or certification of equipment does not by itself establish interoperability across arbitrary vehicle–charger pairings.

These are important milestones. But having published standards doesn't mean that a vehicle from one manufacturer will automatically work with another manufacturer's charger.

Bjoern Christensen, representing the International Energy Agency's Task 53 initiative, noted that more than 150 V2G projects have been undertaken worldwide, yet meaningful commercial scale remains elusive.

One reason is the effort required to make each new equipment combination work.

IEA Task 53 is addressing this through shared implementation guidelines, cross-vendor testing, and common test evidence. Its international effort brings together automakers, charger manufacturers, utilities, and testing laboratories.

The goal is to avoid having every developer solve essentially the same integration problems from scratch.

The takeaway: Standards provide the foundation. Interoperability must still be demonstrated in practice.

4. Interconnection is getting easier—but often not fast enough.

Several presentations showed just how much time V2G projects can lose to utility approvals, permitting, and metering requirements.

PowerFlex reported that 45% of participants in its Massachusetts V2X demonstration were awaiting permitting or interconnection at the time of its assessment. At one school bus installation cited by PowerFlex, equipment installation took two days, while interconnection required 137 days. These are project-specific observations, not universal permitting timelines.

Those delays can undermine project economics before a system delivers its first kilowatt-hour.

There is progress, however.

Roger Salas of Southern California Edison described a new approach that allows residential V2G exports to coexist with legacy net-metered solar. The solution uses separate generation metering and a Rule 21 multiple-tariff arrangement.

Eversource's Mark Moniz discussed similar work in Connecticut, where the utility has developed procedures for connecting V2G alongside solar and stationary batteries.

These are practical advances that other utilities can learn from.

Still, the industry needs more consistent application requirements, clearer equipment approval processes, and faster decisions.

A technology designed to support the grid shouldn't have to spend months waiting for permission to connect to it.

5. The economics of V2G may be better than many people realize.

One of the more provocative arguments in Detroit came from Willett Kempton: V2G may not need large, ongoing subsidies if it can compete in electricity markets on its own merits.

Kempton presented University of Delaware research showing the potential for EVs to earn revenue from several services, including energy arbitrage, frequency regulation, and capacity.

In illustrative University of Delaware market analyses presented by Kempton, estimated annual frequency-regulation revenues reached $1,925 in Delaware and $1,646 in Maryland after accounting for energy losses. These were modeled revenue examples under the research's market and operating assumptions—not net earnings available to every participating vehicle.

The University of Delaware research also compared the cost of using EV batteries already purchased for transportation with constructing dedicated battery installations. Under that dual-use, existing-battery assumption, the estimated cost of EV-based grid storage was markedly lower; the comparison does not mean that EV participation, installation, and operating costs disappear.

These figures are not guarantees of what an individual EV owner will earn. Actual net returns depend on local market participation rules, vehicle availability, the amount and timing of dispatch, energy losses, equipment and installation costs, and any applicable program payments or fees.

But they point to an important possibility: EVs could become competitive grid assets precisely because their batteries have already been purchased for transportation.

The next step is giving them access to markets where that flexibility has value.

6. Utility compensation and regulatory rules may now matter as much as the technology.

Even when the equipment works, V2G won't scale if customers can't earn enough to justify participating.

Several presentations explored how to put a real value on the electricity and grid services that EVs can provide.

Sara Harari of Connecticut Green Bank described efforts to bring bidirectional EVs into the state's existing Energy Storage Solutions program. Its proposed approach would compensate participating vehicles based on actual power delivered, following performance-based structures already used for stationary storage.

Frances Bell of Bidirectional Energy highlighted revenue opportunities in utility programs, while Lawrence Berkeley National Laboratory's Myles Collins examined ways utilities can value managed charging and V2G more comprehensively.

The benefits may extend beyond energy savings. Properly managed EVs could help utilities avoid or defer certain distribution investments and reduce peak demand.

The challenge is creating rules that recognize those benefits without overpaying or shifting unreasonable costs to other customers.

As Kempton argued, the priority should increasingly be removing barriers that prevent V2G from competing—not assuming that subsidies will always be necessary.

7. School buses and fleets remain attractive early markets, but reliability comes first.

Electric school buses are often described as ideal V2G resources. They have large batteries, predictable routes, and substantial parked time.

The reality is more complicated.

PowerFlex presented results from a ComEd school bus pilot in which 82% of 231 scheduled discharge events resulted in power export. The figure measures successful export events within that pilot—not the share of fleets that are deployment-ready or a guarantee that every dispatch will deliver its full requested amount. Performance was stronger during the summer, when vehicles had fewer transportation demands, and declined after the school year resumed.

The lesson is fairly simple: a school bus is a school bus first, and a grid resource second.

Fleet operators can't afford unreliable charging, confusing controls, or programs that add substantial work to their schedules.

Heliox's Keyur Shah described another challenge: coordinating multiple systems that may issue competing commands to a charger. Even when individual components function properly, timing differences and backend integration problems can disrupt operations.

The most successful fleet V2G programs will be those that work quietly in the background, protect vehicle readiness, and generate measurable financial returns.

8. Curbside charging could bring V2G to drivers who don't have garages.

Most residential V2G concepts assume a homeowner with a driveway or garage. But what about the millions of EV drivers who park on city streets?

Nathan King of It's Electric offered an intriguing answer.

The company is developing curbside charging infrastructure that connects to existing building electrical systems. Its next step is bidirectional charging, which could allow street-parked EVs to provide electricity back to buildings or the grid.

Working with the California Energy Commission, It's Electric is developing a bidirectional curbside system using standards-based communications.

The company estimates that California alone could have 9 GW of potential curbside V2G capacity by 2040. That is a projection, not a demonstrated resource, and it depends on substantial EV adoption and infrastructure deployment.

Still, the opportunity deserves attention.

Curbside V2G could make grid participation available to renters, apartment dwellers, and other drivers who cannot install equipment at home.

It could also put distributed energy resources in dense urban neighborhoods where flexible capacity may be especially valuable.

9. Cybersecurity becomes more serious when chargers can control grid power.

A conventional EV charger is primarily an electrical load. A bidirectional charger can also become a controllable power source.

That creates additional cybersecurity concerns.

Researchers from Idaho National Laboratory, Sandia, Argonne, and Pacific Northwest National Laboratory described vulnerabilities involving charger firmware, communications systems, authentication, and remote control.

The risks go beyond stolen customer information or failed charging sessions. Compromised equipment could potentially disrupt electrical operations or create unsafe conditions.

Thomas Carroll of PNNL highlighted a basic problem: many chargers do not provide operators with the security information needed to detect and investigate suspicious activity.

National laboratories are developing tools to address these gaps, including automated vulnerability testing, anomaly detection, and standardized security assessment procedures.

The message was clear. Cybersecurity needs to be designed into the entire V2G system, from vehicles and chargers to aggregators and utility controls.

It cannot be added as an afterthought.

10. The next breakthrough won't come from one company. It will come from making the whole system work.

If there was one lesson connecting nearly every session in Detroit, it was the need for cooperation across organizational boundaries.

Automakers can develop capable vehicles. Charger manufacturers can produce standards-conformant equipment. Utilities can create V2G programs. Aggregators can develop sophisticated controls.

But none of those achievements alone produces a scalable V2G market.

The End-to-End V2G Testbed was a good illustration. It required multiple companies and national laboratories to connect their technologies, resolve integration problems, and demonstrate a complete grid-service transaction in specific AC and DC test configurations. That controlled result was an important technical step, not a demonstration of operation on a public grid or a substitute for fleet-scale operational validation.

IEA Task 53 is working toward a similar outcome internationally, using shared testing evidence and common implementation practices to reduce the cost of bringing new systems into operation.

The industry now needs to make that kind of cooperation routine rather than exceptional.

Scaling means fewer custom integrations, repeatable tests, and clearer approvals. Operational readiness, permissions, and access to grid-service markets must be demonstrated alongside protocol interoperability and cross-vendor compatibility.

Repeatable tests must cover successful dispatch, communications loss, and a vehicle's departure before or during scheduled service. The goal is dependable, permissioned V2G operation—not another one-off demonstration.

Looking Ahead: 2027 Could Be a Pivotal Year

The overall message from Detroit was encouraging, but realistic.

V2G technology has advanced substantially. Standards are becoming more complete. Lower-cost AC solutions are emerging. Utilities are testing workable interconnection and compensation models. And research continues to demonstrate the potential value of EV batteries as flexible grid resources.

The End-to-End Testbed showed how independently developed technologies can function together. Utility requests passed through aggregation and charging equipment to produce measured AC and DC power responses in specific test configurations. The grid was emulated; the system did not operate on a public electricity network.

But commercial scale remains a work in progress.

The biggest obstacles are no longer confined to the vehicle or the charger. They also involve approvals, operating permissions, market access, recovery from disrupted communications, and the practical processes that connect all the pieces.

As the industry moves into 2027, the question is less whether V2G can work in a tested configuration. Detroit offered evidence that it can.

The question now is whether V2G can become simple enough, affordable enough, and dependable enough to work repeatedly in approved, commercially viable settings.

Source: Technical presentations at the 8th V2G Business, Policy & Technology Forum, October 27–29, 2026; Keysight Technologies, “Proving V2G Interoperability: From Standards to Scalable Deployment” (November 3, 2026); and AmpVerve, AC testbed case study. Standards references: UL 1741 (2026 revision) and ISO 15118-20:2022/Amd 1:2026. Cost, revenue and pilot figures cited above are specific to the speakers’ estimates and studies, not customer earnings guarantees or fleet-wide performance forecasts.